Prevents Catastrophic failure when approaching the 1.3 OR lower 60′ times
The output shaft support has a round steel anchor that is bolted to the swingarm pivot. The plate slides over the steel anchor and bolts to the cases with the bolts provided. An extended countershaft sprocket nut then rides in the bearing fitted to the plate. This supports the end of the transmission output shaft preventing broken shafts and engine cases. A longer clutch pushrod is included. The output shaft support can be used with hand or slider clutches. If you have a “grudge bike” you need one of these!
- Suzuki Hayabusa – Gen1 and Gen2
- Suzuki GSX-R1000 – (2005-2008)
- If you are using a factory sensor, then you will require a speedo drive.