Suzuki Hayabusa | Pro Street Oil Pan

Return to Previous Page

Product Description

DME Rear Brake Hanger And Xtra Light Rotor - Hayabusa $712.99
Axle Adjusters $100.00

Suzuki Hayabusa | Pro Street Oil Pan

$499.00

This Pan has an aggressive angle design to for maximum ground clearance, and safety

SKU: 102 Categories: , , Tag:

Description

This Pan has an aggressive angle design to for maximum ground clearance, and safety

Pans measures 1/4” at the front and slopes to 1 ½” at the rear.

These billet oil pans have a swinging pick-up to prevent oil pressure loss when drag racing

Designed for sidewinder exhaust applications

Features:

  •    Billet Aluminum
  •    Swinging pickup with needle bearing
  •    Uses stock drain plug

Note – Oil cooler will need to be removed and blocked off.

Note – This pan requires a shortened oil pressure relief. The required oil relief is included with this product.

Additional information

Weight 4.00 lbs
Dimensions 12.00 × 12.00 × 6.00 in

Reviews

There are no reviews yet.

Leave a reply

Related Products

Quick View
Fuel Cell – Suzuki Hayabusa
...
$600.00
Quick View
CrankShaft – Hayabusa 08-09
Hayabusa Crankshaft 2008-2009
$1,250.00
Quick View
Front Fender Lowering Brackets – Hayabusa (99-07)
These front fender lowering brackets allow you to gain more clearance between the top of your fender and the bottom of your cowling.  They work great for owners that switch over to a 120/60/17 tire, or 16" BST Wheel. Features:
  • 2 adjustable positions (7/16" and 3/4" lower)
  • Comes with mounting hardware
  • Sold as a complete kit
Installation - Simply remove your stock fender and bolt these up to the forks.  Then bolt your fender back on.  Not sure how low to go?  We recommend taping a 10mm socket (3/8" - 1/2" dia.) to the tire and making sure the tire can spin with the fender bolted on.  If the socket hits, the tire is too close to the fender.  As the bike speeds up, the tire will grow and it can rub on the inside of the fender if its too low. *Note - It may be necessary for some front fenders to be trimmed for clearance to the radiator on lowered bikes. What do I do with the rear fender bolts?  The rear fender bolts are no longer used with the lowering brackets.  Four bolts are enough to keep the fender on with speeds up to 214 mph (track tested!)
$42.95
Quick View
Carburetor Fuel Cell – Suzuki Hayabusa
$200.00 – $210.00
Quick View
Front Fender Lowering Bracket Suzuki Hayabusa (08-17) GSX-R1000 (01-08)
These front fender lowering brackets allow you to gain more clearance between the top of your fender and the bottom of your cowling.  They work great for owners that switch over to a 120/60/17 tire, or 16" BST Wheel. Features:
  • 2 adjustable positions (7/16" and 3/4" lower)
  • Comes with mounting hardware
  • Sold as a complete kit
Installation - Simply remove your stock fender and bolt these up to the forks.  Then bolt your fender back on.  Not sure how low to go?  We recommend taping a 10mm socket (3/8" - 1/2" dia.) to the tire and making sure the tire can spin with the fender bolted on.  If the socket hits, the tire is too close to the fender.  As the bike speeds up, the tire will grow and it can rub on the inside of the fender if its too low. *Note - It may be necessary for some front fenders to be trimmed for clearance to the radiator on lowered bikes. What do I do with the rear fender bolts?  The rear fender bolts are no longer used with the lowering brackets.  Four bolts are enough to keep the fender on with speeds up to 214 mph (track tested!)
$42.95
Quick View
Aluminum Subframe (Stock Replacement ) Hayabusa 08-16
Factory Duplicate Aluminum Subframe for the 08-16 Suzuki Hayabusa.
$500.00 – $555.00
Placeholder
Quick View
Hayabusa Fuel Injected Fuel Cell

Features:

  • Light weight aluminum
  • ¼ NPT inlet and outlet for fuel lines
  • Holds 1Quart of fuel
 Note: Mounts on frame cross member under tank , Must drill and tap holes for mounting.
$200.00
Quick View
Counter Balancer Removal Shaft – Suzuki Hayabusa (99-17)
This billet aluminum "dummy" shaft allows you to easily eliminate the counter balancer and shaft(s) from your engine. Simply remove the stock assembly and insert this shaft in its' place. All oil passages are plugged by the shaft and o-rings. Eliminates weight, rotating mass, and reduces crankcase windage and oil churning. *NOTE - Engine removal and disassembly is required for installation.
$28.00
Quick View
DME Rear Brake Hanger And Xtra Light Rotor – Hayabusa
DME Hayabusa Rear Brake Hanger And Xtra Light Rotor
Rated 5.00 out of 5
$712.99 – $789.99
Quick View
Straight link 1/2 Inch – Hayabusa
This is the same link used on DME Racings  Hayabusa Prostreet Bike.
$150.00
Quick View
DME Oil Cooler Block Off Plate – Suzuki Hayabusa (99-17)
The DME Oil Cooler Block-Off Plate is designed to block off the oil cooler lines from the engine case and oil pan to the oil cooler.  Most aftermarket oil pans do not have a spot to mount the oil cooler line, so for those customers, you just need one block off plate for the engine case.
$12.00
Quick View
Hayabusa OEM Clutch Plate Steel Only
Hayabusa clutch steel plates (sold individually)
$9.90
Quick View
Suzuki Stock Oil Filter
Fits all year Hayabusa and GSX-R1000's
$13.45
Quick View
Grudge Rear Sets – Hayabusa
Hayabusa Grudge Rear Sets
$150.00
Quick View
Aluminum Subframe +21″ Hayabusa
Fits 99-15 Hayabusa
$650.00

CONNECT WITH US: 

Questions:  336.785.4845 / contactdmeracing@gmail.com

Record Breakers - 6.46 at 220+mph

© 2018 DME RACING. ALL RIGHTS RESERVED.

close