T-Shirts
Hats
Genuine Siemens Deka 220 lb/H low impedance gas & flex fuel injectors ( long style )
These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr injectors.
These injectors will allow you to run methanol, ethanol and other flex fuels with fewer injectors for high horsepower applications. Don’t settle for questionable modified high flow injectors when you can have Genuine Siemens quality and performance with these injectors. These injectors are perfectly suited for Extreme horsepower turbo & supercharger applications.
FEATURES
- Genuine, reliable Siemens Injectors
- Excellent response characteristics
- Great for use with For use with all gases, methanol, ethanol & racing fuels.
- Robust Design
- Low Impedance
- Long Style
- EV1 Connector
SPECIFICATIONS
- Coil Resistance: 2.27 Ohms / Low Impedance / Low-Z (ECM peakd/hold driver may be required)
- Static Flow Rate @ 43.5PSI ( 300kPa / 3Bar ) w/Gas: 228 lb/hr = 2350 cc/min
- Static Flow Rate @ 50PSI ( 3.5Bar) w/Gas: 240 lb/hr = 2530 cc/min
- Static Flow Rate @ 58PSI ( 4.0Bar) w/Gas: 260 lb/hr = 2725 cc/min
- Compatible with ALL fuels; Flex Fuel E85, Standard Pump Gasoline, E100, Leaded Race Gas up to 120 octane, E10, E25, C85, M100
- Gain: 0.11ms/mg
- Offset: 0.64ms @ 14V
- Factory fitted with Viton upper and lower o-rings
- O-Ring Size: 14.5mm (Standard Bosch EV1 size)
- Turn on time @ 14VDC: 1.5ms
- Turn off time: @14VDC: 1.3ms
- Connector: Bosch EV1 / Jetronic
- Series: DEKA IV / 4
- Orifice Type: Single hole disc
- Spray Pattern: 10-15 Degree
- Body Design: Pencil Style
- Body Diameter: 20mm
- Body Length: 64 mm O-ring to O-ring,
- Overall length: 75mm
