Hayabusa Triple Tree | 1″ Offset

DME Racing’s 1″ Offset Triple Tree for the Suzuki Hayabusa allows you to lower the front end and slide the fork tube through the clamps.

FITMENT

• Suzuki Hayabusa / All Years

FEATURES

• CNC Machined Billet Aluminum
• Uses 50mm clip-ons. The top of the triple tree is 50mm and the bottom is 52mm
• Fork tubes must be turned down to fit triple tree diameters.
• Send in forks for FREE Turndown service with purchase.  (Customer must pay shipping charges.)
• Offset: 1″ offset, which will move the wheel back about 1/4″ (Stock Trees are about a 1¼” offset)
• Set up to use with Scott’s Stabilizer only
• XDA Real Street Legal

READ BEFORE ORDERING

• Triple Trees requires TWO SETS, one Suzuki Steering Bearing Set for the top and one for the bottom of the triple tree.
• The top bearing set from your stock tree can easily be removed and reused with our triple tree.
• The bottom bearing set will require a hydraulic press to remove the race and seal. We suggest purchasing Suzuki Steering Bearing Set, for the bottom, with your triple tree if you cannot access a press.