Showing all 20 results
The DME Oil Cooler Block-Off Plate is designed to block off the oil cooler lines from the engine case and oil pan to the oil cooler. Most aftermarket oil pans do not have a spot to mount the oil cooler line, so for those customers, you just need one block off plate for the engine case.
Billet Quick Access Clutch Cover. While this product is not new it is very much improved over the competition. They also use an OEM sight glass for easy oil level inspection, a 3 bolt cover instead of 5, and our own taper o-ring seal.
This electric water pump only draws 1 amp of current, flows 5 gallons per minute, and with its billet housing with -10 AN inlet and outlets can be installed in your cooling system almost anywhere. The motor on this pump has a 15 000 hour rating. Great for rear mount radiators.
This electric water pump only draws 1 amp of current, flows 5 gallons per minute, and with its billet housing with 1" inlet and outlets can be installed in your cooling system almost anywhere. The motor on this pump has a 15 000 hour rating. Great for rear mount radiators.
Hayabusa turbo oil scavenge pump, replaces factory water pump for models 99-14 (If you're still using a water cooling system an electric water pump must be used.) Pump uses a -6 return line from turbo
High pressure water tank For use in water injection systems, works with nitrous or turbo bikes.
Aluminum motor mount inserts to replace to stock steal mount inserts. Light Weight Aluminum Inserts weighing 3.52oz Stock Steal Inserts weighing 7.92oz (3 piece set) *must use anti-seize
$1,750.00 – $2,650.00
Hayabusa Billet Big Blocks These Billet Big Blocks are used to get the maximum performance out of your Suzuki Hayabusa. Features: CNC machined out of 6061t6 aluminum Avaliable in stock and offset bore spacing. Bore sizes from stock (81mm) to...
Billet aluminum sprocket cover designed to protect engine cases in the event of chain breakage. Designed to be used with heavy duty clutch springs. Fits 99-07 Busa Mounting Hardware Included (Slave cylinder not included)
Large Push peg works with DME Racing Swingarms, and the small push pegs work with stock swingarms.
Pressure Relief fits 99-Up Hayabusas Create higher oil pressure for your high performance engines, creates 125 psi at high rpm. Works with 750,1000 (01-08),and 1300 GSXRs.
Pressure relief valve for a 09-2011 GSXR-1000 Create higher oil pressure for your high performance engines, creates 125 psi at high rpm.
This billet aluminum "dummy" shaft allows you to easily eliminate the counter balancer and shaft(s) from your engine. Simply remove the stock assembly and insert this shaft in its' place. All oil passages are plugged by the shaft and o-rings. Eliminates weight, rotating mass, and reduces crankcase windage and oil churning. *NOTE - Engine removal and disassembly is required for installation.
Hayabusa slider clutch push rod block off. This is use to block the hole in the clutch push rod seal when a slider clutch is used.
GSXR 1000 slider clutch push rod block off. This is use to block the hole in the clutch push rod seal when a slider clutch is used.
- Billet aluminum
- Low profile
- Internal baffling
- 3/8 NPT breather port
- Two 6mm tapped holes for component mounting (nos solenoids etc.)
Fits All year Kawasaki ZX-14 Used to remove and block off water pump in engine cases when radiator has been removed in drag racing applications.
Used To cover water neck outlet in cylinder block in dry block applications.
Used to cover thermostat outlet in cylinder cylinder in dry block applications.