2011, Racing News

2011 BMW S1000RR – The Infamous Project

Chris Savard (a.k.a. Infamou$), labels himself as an automotive puppeteer that has been modifying cars for the past 2 decades. He has traveled the world for both work and pleasure where he has maintained a professional career working in a 3 piece suit by day and by night he’s in his dickies and ball cap working on his projects.

In one of his few motorcycle projects, Chris brought his 2011 BMW S1000RR with under 500 miles on the bike to DME Racing. It went directly under the knife in a quest to become the world’s fastest S1000RR in the 1/4 mile. We fabricated an aluminum swingarm and Billet Oil Pan for this motorcycle and installed a Billet shifter assembly and Penske adjustable race shock.

Then it was outfitted with a one-off race harness, PS2000 ECU, Haltech/RacePak logger Dash, HPI-4 Ignition. All of the fairings were pulled off and sent to Florida where painted Lamborgini Gallardo Orange. The bike was taken over to DaVinci Turbo where the turbo kit was built!

That being said this is still a street bike with a factory long block in it and can be ridden with no issues other than getting traction when its turned up. The previous owner managed to run an 8.401 @175 with only a 1.46 60ft. Now it’s time to bring this bike to a different level. Here is a list of the current mods.

DME Racing Products

  • DME Aluminum Swingarm
  • DME Billet Oil Pan & Billet oil Pick-up
  • DME Air Shifter & Cylinder Mount
  • Penske Adjustable Race Shock

Turbo Set-up

  • Davinci Race Turbo
  • 321ss 4into1 Race Header
  • TIAL MVR 44mm wastegate
  • 3073 GTX Billet Wheel Turbo
  • Sheetmetal Intake Manifold

Water Injection System

  • Bottle/Gauge/Brackets
  • Stainless Steel water tank

Fuel System

  • Walbro pump
  • Aeromotive Fuel regulator


  • Haltech/RacePak Logger Dash
  • PS2000 ECU
  • Long Race Harness & Fuse block
  • Boost Control Solenoid
  • Dual Channel Wideband controller
  • TCA4 EGT Kit
  • HPI4 Igniter Module
  • Air Temp sensor
  • 2000psi sensor &fittings for back pressure sensor kit
  • Can Hub 6-port
  • 10 bar Fuel Pressure sensor
  • 3 bar Map sensor
  • s3 Hall Effect Sensor(used for a speed sensor for boost control)
  • external USB hook-up
  • external Negative & Positive hook-up


  • DaVinci Brackets & strap kit & modded clutch hub
  • Brocks Heavey Duty Spring & shim kit
  • Lamborghini Orange paint
  • Roaring Toyz Front and Rear Seats w/orange stitching
  • CVR Billet adjustable levers
  • World Wide Ceramic Bearings Front & Rear